In this study, the effects of kaolin addition on the properties of reticulated porous diatomite-kaolin composites are investigated. A reticulated porous diatomite-kaolin composite is prepared using the replica template method. The microstructure and pore characteristics of the reticulated porous diatomite-kaolin composites are analyzed by controlling the PPI value (45, 60, and 80 PPI) of the polyurethane foam (which are used as the polymer template), the ball-milling time (8 and 24 h), and the amount of kaolin (0–50 wt. %). The average pore size decreases as the amount of kaolin increases in the reticulated porous diatomite-kaolin composite. As the amount of kaolin increases, it can be determined that the amount of inter-connected pore channels is reduced because the plate-shaped kaolin particles connect the gaps between irregular diatomite particles. Consequently, a higher kaolin percentage affects the overall mechanical properties by improving the pore channel connectivity. The effect of kaolin addition on the basic properties of the reticulated porous diatomite-kaolin composite is further discussed with characterization data such as pore size distribution, scanning electron microscopy images, and compressive strength.

Macroporous ceramics with tailored pore size and shape could be used for well-established and emerging applications, such as molten metal filtration, biomaterial, catalysis, thermal insulation, hot gas filtration and diesel particulate filters. In these applications, unique properties of porous materials were required which could be achieved through the incorporation of macro-pores into ceramics. In this article, we reviewed the main processing techniques which can be used for the fabrication of macroporous ceramics with tailored microstructure. Partial sintering, replica templates, sacrificial fugutives, and direct foaming techniques was described here and compared in terms of micro-structures and mechanical properties that could be achieved. The main focus was given to the direct foaming technique which was simple and versatile approach that allowed the fabrication of macro-porous ceramics with tailored features and properties.

Citations

Citations to this article as recorded by  

• Organic waste-derived pore formers for macroporous ceramics fabrication: A review on synthesis, durability properties and potential applications
  T.T. Dele-Afolabi, M.A. Azmah Hanim, A.A. Oyekanmi, M.N.M. Ansari, Surajudeen Sikiru, O.J. Ojo-Kupoluyi
  Materials Today Sustainability.2024; : 100824.     CrossRef
• Investigating mass transfer coefficients in lean methane combustion reaction through the morphological and geometric analysis of structured open cell foam catalysts
  Carmen W. Moncada Quintero, Hernan G. Mazzei, Marion Servel, Frédéric Augier, Yacine Haroun, Jean-François Joly, Stefania Specchia
  Chemical Engineering Science.2023; 281: 119138.     CrossRef
• Composite PLGA–Nanobioceramic Coating on Moxifloxacin-Loaded Akermanite 3D Porous Scaffolds for Bone Tissue Regeneration
  Georgia K. Pouroutzidou, Lambrini Papadopoulou, Maria Lazaridou, Konstantinos Tsachouridis, Chrysanthi Papoulia, Dimitra Patsiaoura, Ioannis Tsamesidis, Konstantinos Chrissafis, George Vourlias, Konstantinos M. Paraskevopoulos, Antonios D. Anastasiou, Dim
  Pharmaceutics.2023; 15(3): 819.     CrossRef
• Development of high strength large open porosity alumina ceramics using the sacrificial phase route: The role of the sacrificial phase fineness
  Julian Alzukaimi, Rafi Jabrah
  Ceramics International.2023; 49(2): 2923.     CrossRef
• Sustainable nanocomposite porous absorbent and membrane sieves: Definition, classification, history, properties, synthesis, applications, and future prospects
  Sameer Ahmad, Weqar Ahmad Siddiqi, Sharif Ahmad
  Journal of Environmental Chemical Engineering.2023; 11(2): 109367.     CrossRef
• Processing and characterization of porous composites based on CaAl4O7/CaZrO3
  Yesica L. Bruni, María S. Conconi, María F. Hernández, Gustavo Suárez
  Ceramics International.2023; 49(23): 37630.     CrossRef
• Trace addition of cellulose nanofiber in gel-casting system for structurally controlled porous ceramics towards superior thermal-insulating property
  Yunzi Xin, Takashi Shirai
  Journal of the Ceramic Society of Japan.2022; 130(5): 355.     CrossRef
• State-of-the-art review of fabrication, application, and mechanical properties of functionally graded porous nanocomposite materials
  Ismail Barbaros, Yongmin Yang, Babak Safaei, Zhicheng Yang, Zhaoye Qin, Mohammed Asmael
  Nanotechnology Reviews.2022; 11(1): 321.     CrossRef
• A review of petroleum emulsification types, formation factors, and demulsification methods
  Ahmed Abdulrazzaq Hadi, Ali Abdulkhabeer Ali
  Materials Today: Proceedings.2022; 53: 273.     CrossRef
• SLURRY OPTIMISATION FOR FAST FREEZE-DRYING OF POROUS ALUMINA
  Kritkaew Somton
  Ceramics - Silikaty.2021; : 368.     CrossRef
• Recycling food, agricultural, and industrial wastes as pore-forming agents for sustainable porous ceramic production: A review
  Siti Zuliana Salleh, Afiqah Awang Kechik, Abdul Hafidz Yusoff, Mustaffa Ali Azhar Taib, Maryana Mohamad Nor, Mardawani Mohamad, Tse Guan Tan, Arlina Ali, Mohamad Najmi Masri, Julie Juliewatty Mohamed, Siti Koriah Zakaria, Jia Geng Boon, Faisal Budiman, Pa
  Journal of Cleaner Production.2021; 306: 127264.     CrossRef
• Novel noble-metal-free ceramic filter with controlled pore structure for environmental cleaning
  Yunzi Xin, Sohei Nakagawa, Harumitsu Nishikawa, Takashi Shirai
  Ceramics International.2021; 47(8): 11819.     CrossRef
• Fabrication of porous titania sheet via tape casting: Microstructure and water permeability study
  Saber Ghannadi, Hossein Abdizadeh, Alireza Babaei
  Ceramics International.2020; 46(7): 8689.     CrossRef
• Farklı Bağlayıcı ve Sinterleme Katkılarının SiC Seramik Prefom Mikroyapısı Üzerine Etkisi
  Ebru Yılmaz, Fatih Çalışkan
  Academic Perspective Procedia.2019; 2(3): 1309.     CrossRef
• The preparation and characterization of porous alumina ceramics using an eco‐friendly pore‐forming agent
  Julian Alzukaimi, Rafi Jabrah
  International Journal of Applied Ceramic Technology.2019; 16(2): 820.     CrossRef
• Wet Foam Stability from Colloidal Suspension to Porous Ceramics: A Review
  Ik Jin Kim, Jung Gyu Park, Young Han Han, Suk Young Kim, James F. Shackelford
  Journal of the Korean Ceramic Society.2019; 56(3): 211.     CrossRef
• Processing of porous alumina by foaming method-effect of foaming agent, solid loading and binder
  Soumya Devavarapu, Paritosh Chaudhuri, Aroh Shrivastava, Santanu Bhattacharyya
  Ceramics International.2019; 45(9): 12264.     CrossRef
• Macroporous flexible polyvinyl alcohol lithium adsorbent foam composite prepared via surfactant blending and cryo-desiccation
  Grace M. Nisola, Lawrence A. Limjuco, Eleazer L. Vivas, Chosel P. Lawagon, Myoung Jun Park, Ho Kyong Shon, Neha Mittal, In Wook Nah, Hern Kim, Wook-Jin Chung
  Chemical Engineering Journal.2015; 280: 536.     CrossRef

In this study, diatomite based materials were investigated as a support filter for silica particle coating. The silica sol for coating was synthesized by a stöber process. The diatomite support was dry-pressed at 10 MPa and sintered at 1200°C for 1 hour. The coating sol was prepared as a mixture of EtOH and silica sol. The diatomite support was coated by a dip-coating process. Silica coated diatomite filter was sintered at 1000~1200°C for 1 hour. The largest pore size was decreased with increasing concentration ratio of coating sol. The gas and water permeability of silica coated diatomite decreased with increasing of concentration ratio of the coating sol.

Citations

Citations to this article as recorded by  

• Application of Physical and Chemical Enhanced Backwashing to Reduce Membrane Fouling in the Water Treatment Process Using Ceramic Membranes
  Seogyeong Park, Joon-Seok Kang, Jeong Lee, Thi-Kim-Quyen Vo, Han-Seung Kim
  Membranes.2018; 8(4): 110.     CrossRef
• Effects of particle size and forming pressure on pore properties of Fe-Cr-Al porous metal by pressureless sintering
  Bon-Uk Koo, Yujeong Yi, Minjeong Lee, Byoung-Kee Kim
  Metals and Materials International.2017; 23(2): 336.     CrossRef
• Characterization and Microstructure of an Extruded Flat-Tubular-Type Alumina Filter
  Byung-Seo Bae, Jang-Hoon Ha, In-Hyuck Song
  Journal of the Korean Ceramic Society.2014; 51(5): 406.     CrossRef